cartridge heater การใช้

• The first swaged cartridge heater, the patented device greatly increased heat transfer efficiency.
• A few years later, George invented the FIREROD cartridge heater.
• These 12 cartridge heaters are arranged in a ring inside of the melting head.
• The sheath is the part of the cartridge heater which makes contact with the material or substance to be heated.
• To ensure the MgO fills the empty space between the sheath and the coil, the cartridge heater is filled under vibration.
• The temperature of the Nichrome wire and the cartridge heater were controlled by thermostats wired with thermocouples that were placed inside its body and tail.
• To control the temperature of the interior of robosquirrel s body, a coiled Nichrome 80 resistance wire was inserted and a cartridge heater was inserted into its tail.
• After the cartridge heater has been filled with MgO, a seal is applied to the open end of the cartridge heater ( where the Nicrome coil was introduced ).
• After the cartridge heater has been filled with MgO, a seal is applied to the open end of the cartridge heater ( where the Nicrome coil was introduced ).
• A "'cartridge heater "'is a tube-shaped, heavy-duty, industrial Joule heating element used in the process heating industry, usually custom manufactured to a specific watt density, based on its intended application.
• Potential from an alternating current source, which can either be 2 phase or 3 phase, flows through the coiled Nichrome wire, heating up the wire, which in turn, heats the cartridge heater sheath.
• VBC Manufacturing Sdn Bhd manufactures tubular heater, cartridge heater, infrared ceramic / silica / quartz heater, Mica band and strip heater, Thermocouples, and Current Transformer, basically for industrial heaterand more towards custom-made products.
• Since cartridge heaters are installed in a wide variety of machines, manufacturers must design the heaters to meet certain clearances . [ dead link ] The cartridge heaters might be terminated with the leads coming out straight, or in a right angle.
• Since cartridge heaters are installed in a wide variety of machines, manufacturers must design the heaters to meet certain clearances . [ dead link ] The cartridge heaters might be terminated with the leads coming out straight, or in a right angle.